Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not get rusty or decay.

Cleaning and lubricating regularly upvc window repairs near me windows and doors is vital. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they typically fit into old frames very easily. However when you have double-pane windows that are anchored by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this case it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

It's a good idea to tape the gap once the glass has been removed. This will stop drafts and water from entering your home until a professional is able to fix the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

upvc window repair is durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act as soon as you discover that your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll have to open the window to get to the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in the right place.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles may also loosen up. This is usually due to screws that have been removed over time, but it can also be caused by the handle mechanism wearing out. It's fairly simple to repair a loose uPVC handle. You'll first need to close the window and do an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is important to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on the severity of the problem the old caulking may require removal before a fresh layer is applied. When it comes to uPVC repair, you must avoid over-caulking. This can make your window more difficult to clean and lower its energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens with an ease. These are easily replaced by any competent DIYer and can be completed in a matter of minutes.

Like any mechanical part hinges will wear out over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is simpler when you have a person to assist in holding the frame in place.

Make sure that the uPVC hinges open and close in the right direction. You can check this by looking for the arrow on each hinge. This shows which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be pleased to offer you advice.

It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is an ideal way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. It is recommended to do this once a year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your upvc window repairs near me windows.

5. Draughts

Draughts can be caused by different factors. The hinges, also due to wear and tear may become displaced, which will cause an opening to appear where the sash meets the frame. These can be easily repaired by giving them good cleaning, but if they are beyond repair it might be necessary to get them aligned or replaced. In addition, the interlock could be unbalanced. This happens on the hinge's side and may need to be cleaned. In some instances, it may be necessary to replace the hinges.

The seals may wear out or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures and decrease the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them. If you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.